Dandy Blog

Welcome To the Dandy Product Blog

Proper Use of Inlet Filters

Posted by: Seo User on 12/6/2015

Are you sure that the water in your home is safe? Curb Inlet filters makes protecting inlets effective, efficient and easy. Inlet filters can be joined in succession with given couplers and developed to cover any length curb opening storm drain providing complete inlet coverage. Not only that, inlet filters also remove debris and polluting agents from storm water runoff, keeping the drainage waterways in the area clear and clean. Thus, prevents contamination. Protecting inlet options utilizes synthetic or natural materials so that it can effectively control sediments and keep unwanted debris away from contaminating our waterways. Sediment control is important to the effectiveness of the storm water management so it is a must that the inlet filters can facilitate water management, reduce maintenance cost and maximize the effectiveness of the drainage system.

Inlet filters also helps in preventing ponding and overflow even in heavy storm situation because of its permeability and security features. By using one high quality inlet filter, of course with the compliance of the rules and regulation that include water management will keep you safe from contamination.

This process is known as storm drain inlet protection. There are different types of inlet protection and these are:

1. Excavation around the drop inlet - Through excavating an area around the inlet construct a settling pool that will remove sediments as the water is released gradually into the inlet with the help of small holes protected by the gravel and filter fabric.

2. Fabric barriers around inlet entrances - This type of protection creates a shield against the sediment while providing the water a way to flow into the drain.

3. Block and gravel protection - Concrete blocks and gravel are good form of barrier to sediments that allows water runoff to stay contained

Aside from these inlet protections, sandbags are also used to create temporary sediment barriers at inlet. But if you are planning to have a permanent inlet protection, you can install sod. This permanent way is an aesthetically good way to slow down storm water near drop inlet entries and of course to remove sediments and other pollutants from run off.

All of the temporary inlet protection must have a drainage area not greater than 1 acre per inlet. Temporary controls must be created before the surrounding landscape is disturbed. Excavated drop inlet protection and block and gravel inlet protection are really applicable to areas of high flow, where drain overflow is expected. Fabric barriers are recommended for smaller, flatter drainage areas such as slopes less than 5 per cent leading to the drain). Temporary drop inlet control measures are most frequently used in sequence or with other erosion control techniques.

In conclusion, inlet filters are really important in keeping our water free from contaminants and pollutants. Being informed concerning the safety in water management means that you are aware of the dangerous result that contaminated water could bring to your family. It is better to prevent than to take the risk.

Create a trackback from your own site.

0 Comments

Leave A Comment



Please enter the CAPTCHA phrase above.